There are two basic requirements in order to enable LAN testing on a Komodo Eye Device.
- Firmware version must be higher then version 44; currently, version 60 is recommended. Please contact firstname.lastname@example.org to upgrade your firmware.
- Komodo Eye Device must be wired to it's LAN port on the hardware and have a valid network connection. Currently only DHCP connections are supported. Manual TCP/IP configuration is a feature that is coming soon.
That's all it takes. Simple.
Once these requirements are met, you can configure LAN testing devices the same way that you would configure a Wi-Fi testing device. In fact, LAN test configuration is even easier because no SSID credentials are needed.