When a Komodo Eye Device executes a Komodo Test, the wired or wireless network specified in the test configuration will be used.
A wireless test configuration requires the Wi-Fi Network SSID name and password, depending on the Wi-Fi authentication defined by the Wi-Fi Access Point or Wi-Fi Controller. The wireless test configuration can also include instructions for navigating through a captive portal. All captive portal types are supported but it does require capturing captive portal parameters (see also Wi-Fi Education for video content).
The Wi-Fi authentication types that are supported are as follows.
- None
- WEP
- WPA/WPA2 Personal (PSK)
- WPA/WPA2-Enterprise (EAP)
- TLS
- PEAP
- TTLS
A wired test configuration only requires the circuit speed and a few other optional parameters to be defined for the test to execute properly.
9 Comments